Table of Contents
Advertisement
----------------------------------------------------------------------------------------DVD2 OPERATIONS MANUAL
MOUNTING INSTRUCTIONS (OPTIONAL)
Installing HCI DVD player flat against the wall or on a flat surface.
1.
Place DVD mounting bracket bottom of HCI DVD player as picture shown above.
2.
Use the 4 M4x8mm screws and 4 black washers (included with DVD player) to fasten the mount to DVD player.
3.
Place DVD player fixed with mounting bracket flat against the wall.
4.
Using 4pcs 1/4`` lag bolts fasten the DVD player onto wall or flat surface.
Mounts are available to mount the DVD player directly to an HCI RoomMate series TV. Mounts are available for left, right and
bottom mounting. Contact your dealer for more information and part numbers. For these mounts, follow the directions that are
included with the mount to mount the DVD player to the TV.
5.
Connect the RJ-11 cable to the RJ-11 jack on the rear panel of the TV to the RJ-11 jack on the rear panel of the
DVD player. (Optional for pillow speaker control only)
6.
For HCI RoomMate TV's connect the HDMI output of the DVD player to the HDMI input of the TV.
7.
Plug the power cord in to the power cord jack on the rear panel of the DVD player and the other end in to a
standard wall outlet.
HealthCare Information, LLC
6
Advertisement
Table of Contents
