HUSKY LINERS 8141 Care And Use Instructions

THANK YOU FOR SELECTING A HUSKY FLOOR LINER
Your new floor liner is custom molded to fit your particular vehicle. The liner is made to take the place of your
factory floor mats. For correct fit, it is necessary to remove the factory floor mat before installing your new floor
liner. However, do not remove the factory-installed carpeting.
Your liner is made from an engineering resin that is lightweight and extremely tough and durable. The easiest
way to clean your liner is with a damp cloth or sponge. If using a cleaner, 409
®
Armor All , Son-of-a-Gun
INSTALLATION INSTRUCTIONS FOR YOUR TAHOE
YUKON/DENALI/ESCALADE THIRD SEAT ACCESS LINER
PART #8141 IS DESIGNED FOR USE WITH ESCALADE/YUKON/DENALI AND TAHOE'S EQUIPPED WITH 2
ROW BUCKET SEATING. THIS LINER PROTECTS THE THIRD SEAT ACCESS AREA (WALKWAY BETWEEN
ND
2 ROW BUCKETS) THAT IS NOT COVERED BY THE SECOND SEAT HUSKY LINER (PART #6141). IF YOUR
VEHICLE IS EQUIPPED WITH A REAR BENCH SEAT, YOU DO NOT NEED THIS PART.
TO INSTALL LINER, FIRST FLIP BOTH 2
ROW SEATS DOWN, MAKING SURE THEY ARE SECURELY LOCKED INTO POSITION. A PHOTO OF THE
INSTALLED PART IS ON THE BACK OF THIS PAGE.
FROM WINFIELD CONSUMER PRODUCTS
CARE AND USE INSTRUCTIONS
®
or similar items is discouraged as these products make the liner slick.

REAR OF VEHICLE (CARGO AREA)

ND
ROW SEATS FORWARD. ONCE LINER IS INSTALLED, FLIP 2
® ®
or Glass Plus work well. Use of
8141 Installation Ins#C2940.doc
ND
ND
07/27/2006