Weight Of The Door Front; Building Into A Peninsular Run; Building-In At The End Of A Run Of Units - Miele F 1811 Vi Operating And Installation Manual

Installation
Stainless steel fronts
Stainless steel fronts and stainless steel
look plinth grilles are available from
your dealer or the Miele Spare Parts
Department.

Weight of the door front

Before fitting the door front, ensure that
the weight of the fronts does not
exceed the maximum permitted:
Appliance
F 1811 Vi
F 1911 Vi
Fitting a door front which is heavier
than the maximum permitted could
damage the hinges.
60
Max.
weight
of door front in kg
48
36

Building into a peninsular run

When built into a peninsular run, the
rear of the building-in niche must be
fitted with a kitchen furniture panel.
Building-in at the end of a run
of units
If one side of the appliance is visible, a
side panel is required.
The side panel must be fixed to the
wall, the floor and any furniture/units
above before the appliance is placed in
the niche.
The size of the side panel must match
that of the furniture panel opposite.