Miele F 1811 Vi Operating And Installation Manual page 17

Switching the sensor tone on/off
The tone which sounds each time a
sensor is touched can be deactivated.
^ Touch the access sensor so that it is
highlighted in yellow.
^ Take note of the position of the X
sensor (but do not touch it!).
^ Touch the access sensor until it is
highlighted in white and all of the
other sensors are no longer lit up.
^ Place your finger in the position of the
X sensor, and leave it there.
^ At the same time, briefly touch the
access sensor (without moving your
finger from the X sensor).
^ Leave your finger on the X sensor for
another 4 seconds until c and the Y
sensor also appear in the display.
^ Now touch the X sensor repeatedly
until b appears in the display.
^ Touch the access sensor again.
Switching on and off
^ By touching the X sensor, you can
now select whether the sensor tone is
switched on or off:
= 0: Sensor tone switched off
= 1: Sensor tone switched on
= –: Return to menu
^ After selecting a new setting, touch
the access sensor to confirm your
choice.
^ Touch the X sensor repeatedly until ;
appears in the display.
^ Touch the access sensor.
You have now left settings mode.
The door alarm is automatically
disabled when the appliance is in
settings mode. As soon as the door
is closed, the door alarm is activated
again.
17