Fitting The Plinth Facing - Miele F 1811 Vi Operating And Installation Manual

Installation
^ Now attach the covers onto the
retaining clips on both sides.
In the case of side-by-side
installation, the cover strips are only
required on the outer side.
^ Fit the cover to the light contact
switch so that it clicks into place as
shown.
74

Fitting the plinth facing

Do not cover the vents in the plinth.
This could result in damage to the
appliance.
^ Trim the plinth facing to the required
length and height (cut along the
lower edge of the plinth facing where
it touches the floor).
^ Secure the plinth to the appliance,
and attach the cover caps supplied.
^ Now fit the plinth facing.