Boss GT-X Setup Manual page 38

Guitar effects processors

Table of Contents

Section 7

Level Metering

I now mark the display by drawing in a line in-between the

character segments. The display is 2 characters high. I draw

2 high for 0%, 50%, and 100%, and 1 high for the others.

You now have a meter use can refer to in terms of

volume%.

An alternative suggestion has come from Scott Russell on

the GT-3 group, who suggested placing masking tape on the

front beneath the LCD and then marking the tape up as

above.

Manuel "Jed" Saldaña on the GT-3/5 Yahoo Groups

suggested an alternative to marking up the LCD display.

Simply print out the template in Appendix E onto a

transparency/acetate cut it out. This provides a nice quick

way of marking up the display. However, it works better

with colour printers – black can be a little hard to read.

Any further ideas please let me know!

Table of Contents