Smart Technologies SMART Board Installation And User Manual page 22

To test your interactive display frame pencil
1. Open SMART Notebook's control panel, and then select Connection Wizard.
NOTE: You can also access the calibration feature by selecting SMART Hardware Settings,
selecting your product, clicking Advanced Settings, and then clicking Calibrate. If you
access the feature this way, proceed to step 5.
The SMART Connection Wizard appears and scans your system for the appropriate SMART
hardware product. This may take several moments.
Your interactive display frame appears as SMART Board (0x3) - on USB in the list with a
check mark beside it, as shown.
2. Select your interactive display frame, and then click Next (Windows computers) or
Continue (Mac computers).
3. If your cameras are working correctly, they appear in a list with a check mark beside each
camera. Click Next (Windows computers) or Continue (Mac computers).
16 Calibrating and Orienting Your SMART Board interactive display frame