Recording A Loop (Auto Quantize) - DigiTech JamMan SOLO XT Owner's Manual

Recording a Loop (Auto Quantize)

Pedal Tempo Off (Default)/Auto Record Off (Default)
Select an empty memory location
1.
using the
<UP/DOWN>
( and
LOOP SINGLE
Set the
2. <RHYTHM LEVEL>
to the 9 o'clock position then tap
the
<TEMPO>
the rate you want the phrase tempo
to be. You will begin to hear the
Rhythm Guide Track. The beats will
be indicated by a flashing
button LED, flashing red on the first
downbeat and green on all remaining
beats of the measure. When using the
Rhythm Guide Track, time signature
can be manually set to a different time
signature other than the default of 4
beats per measure (see "
").
Signature
buttons
LEDs will be off).
control
button a few times at
TEMPO
Setup > Time
Press the
3. <PEDAL SWITCH>
initiate recording and begin playing.
You will receive a one measure count
in, indicated by a flashing red and
green
STATUS
in, begin playing with the first beat
to start recording. Recording will be
indicated by a solid red
As soon as you're done recording,
4.
press the
<PEDAL SWITCH>
to stop recording and initiate playback.
Quickly press the
twice to stop loop playback.
Press the
5. <STORE>
you wish to store the loop.
to
LED. After the count
LED.
STATUS
again
<PEDAL SWITCH>
button twice if
17