Download Print this page

DeLonghi SCF 1000 Instructions page 4

Towel warmer

Advertisement

Appliance off
Adjusting the thermostat
Start with the thermostat knob in the Max position.
When the room has reached the required temperature, turn the thermostat slowly until the con-
vection heater goes off and no further. The thermostat will automatically regulate the tempera-
ture set and keep it constant.
Frost protection function
With the thermostat knob in the minimum
(convection heater mode), the appliance will keep the room at a temperature of about 5°C, pre-
venting freezing with minimum energy expenditure.
Hair drying function
With the electronic control unit set to
be set by simply turning the thermostat knob to the MAX position until you hear a click.
Functioning in automatic mode (TIMER)
• The electronic control of the appliance enables four independent automatic start-up times to
be programmed: two for the heated rail (P1 and P2) and two for
the convection heater (P3 and P4) during a 24-hour period.
• To pass from manual mode to automatic mode, just press one of the
two buttons, "P
P1 and P2) and "P
programmes P3 and P4).
Programming the heated rail
The first time button P1 is pressed, the following is displayed:
• the flashing message "-:-"
• the message "ON" at the bottom left (ON time setting);
• the symbol " 1" at the right indicating that the first automatic pro-
gramme controlling the heated rail (P1) is being set
• To set the starting time of the programme, press the "Clock Set" but-
ton to select the time you want the appliance to start operating (see
paragraph "Setting the Clock"), then confirm the ON time by press-
ing the "P
" button (eg. 8.30).
The word "OFF" and "00.00" appears at the bottom left of the display.
• Set the time you want the appliance to go OFF (eg 9.30) using the
"Clock Set" button (see paragraph "Setting the Clock").
Press the button "P
Heated rail on
Convection heater and
heated rail on
(and irrespective of the
" (programming of the heated rail, programmes
" (programming of the convection heater,
" to confirm the OFF time.
position and the electronic control unit set to
setting), the "Hair Drying" mode can
14
Convection heater on
Pr
ess the P1/P2
Pr
ess the P1/P2
button
button
:
ON
Pr
ess the "Clock
Pr
ess the "Clock
set" + "P1" button
set" + "P1" button
OFF
OFF

Advertisement

loading