Advertisement
BAMBINO
21-04-2004
fig. 1
Oil Filled Radiator
9:58
Pagina 4
Adjusting the thermostat
Leave the thermostat at its highest setting until the room has
reached the required temperature.Then slowly turn the thermo-
stat back until the indicator light goes off (or until you hear a
click).The temperature selected in this way will then be regulated
automatically and kept constant by the thermostat.
Frost protection function
Turn the thermostat dial to the
The appliance will maintain a minimum room temperature of
approximately 5°C thus preventing freezing with a minimum
energy consumption.
Maintenance
Before carrying out any maintenance, unplug the heater from the
mains and wait for it to cool.
The oil-filled electric radiator requires no particular maintenance.
It is sufficient to remove the dust with a soft, dry cloth. Never use
abrasive powders or solvents. If necessary remove concentrated
areas of dirt with a vacuum cleaner (Fig. 1).
Warnings
-
Do not make use of this heater in the immediate proximity of showers,
bathrubs, sinks, swimming pools etc.
-
Never use the heater to dry laundry.
-
Never place the power cable on top of the heater while it is hot.
-
Only use the heater in an upright position.
-
The heater must be positioned at least 50cm from furniture or other
objects.
-
If the power cable is damaged, it must be replaced by the manufacturer
or an authorised technical service centre.
-
It is normal for the heater to make 'crackling' noises during the first
time it is switched on (or in the case of infrequent use)
-
The body of the heater is filled with an exact quantity of oil. If repairs
are necessary which call for the opening of the heater, they must be
done only by the manufacturer or by an authorised service centre. In
the unlikely event of oil leakage, contact the manufacturer or by an
authorised service centre.
-
The heater must never be placed immediately under a fixed mains socket.
-
When scrapping the appliance, respect legislation on the disposal of oil.
-
IMPORTANT: Never for any reason cover the appliance during
operation as this could lead to dangerous overheating.
-
The use of an extension lead is not recommended, however if it is
neccessary then follow carefully the extension lead's instructions, and
most importantly ensure that the extension lead is correclty rated in
accordance with the heater being used and NEVER overloaded.
*
position and press the switches.
4
Advertisement
