Update Tab - NComputing M300 User Manual

6.9 Update Tab

The "Update" tab is used to check for and install (if available) firmware updates for the device. This tab
allows you to select from several different update methods, and can be set to draw firmware updates
from inside your network, or from an external FTP location.
Enable this option to instruct the device to automatically check for newer firmware
Automatic
that is available on the servers it can see during startup. If found, it will then
Update
download and install this firmware automatically.
Search and This option instructs the device to search for updated firmware within the local
Update from LAN
area network it resides in.
This option instructs the device to search for updated firmware at a specific FTP
location. Enter the full path of a specific firmware file to force the device to use
that specific file (which allows for downgrading if needed). Enter the path of a
Search and folder that contains multiple firmware versions and a firmware index file to
Update from FTP
instruct the device to use the most recent firmware version available, according to
Server the index file.
For more information on firmware updates via FTP, visit
http://www.ncomputing.com/kb/Using-FTP-to-update-L300-Firmware_308.html
FTP Server These fields allow you to enter the URL, user name and password for the FTP
Credentials server you wish to use (if required).
Page 69 of 78
NComputing M300 User Manual rev.02.21.12