Connections Tab - NComputing M300 User Manual

6.4 Connections Tab

The "Connections" tab provides several host configuration options that determine how the device finds
and then connects to available hosts. From here, you can set the device to automatically detect
available servers, or instruct the device to connect to specific predetermined hosts or groups of hosts.
Configures the device to automatically connect to a predefined server location or
Autoconnect to
server group.
Manual
Configures the device so that the user can select a specific host, IP or Server Group
connection
each time the device boots.
options
Auto-discovered
Enable to display all available hosts on the device's subnet.
connections
IP address or
Enable to allow the user to type in a specific IP or host name.
hostname
Server group list Enable to allow the user to select a server group to connect to.
Page 63 of 78
NComputing M300 User Manual rev.02.21.12