Table of Contents
Advertisement
5.
I forgot my password.
Reset the Wireless N Gigabit Router to factory default by pressing the Reset button
Ans.
for about 5 seconds and then releasing it. The default User Name and Password is
admin/admin.
6.
What is ad-hoc mode?
When a wireless network is set to ad-hoc mode, the wireless-equipped computers are
Ans.
configured. To communicate directly with each other, peer-to-peer without the use of an
access point.
7.
What is infrastructure mode?
When a wireless network is set to infrastructure mode, the wireless network is configured to
Ans.
communicate with a network through a wireless access point.
8.
What is roaming?
Roaming is the ability of a portable computer user to communicate continuously while
Ans.
moving freely throughout an area greater than that covered by a single access point. Before
using the roaming function, the computer must make sure that it is the same channel
number with the access point of dedicated coverage area.
9.
What is ISM band?
The FCC and their counterparts outside of the U.S. have set aside bandwidth for unlicensed
Ans.
use in the ISM (Industrial, Scientific and Medical) band. Spectrum in the vicinity of 2.4 GHz,
in particular, is being made available worldwide. This presents a truly revolutionary
opportunity to place convenient high-speed wireless capabilities in the hands of users
around the globe.
10.
What is MAC Address?
Short for Media Access Control Address. It is a hardware address that uniquely identifies
Ans.
each node of a Ethernet networking device. This address is usually permanent.
11.
What is IEEE 802.11b standard?
IEEE 802.11b is an extension standards to 802.11 that applies to Wireless LAN and
Ans.
provides 11Mbps transmission speed in the 2.4 GHz band.
12.
What is IEEE 802.11n standard?
Ans. IEEE 802.11n is an extension standards to 802.11 that applies to Wireless LAN and
61
Advertisement
Table of Contents
