Table of Contents
Advertisement
connect through wireless channels as defined for local regulatory domain.
5.
LAN (Link/Act) LED does not light up.
Check the following:
Ans.
1. Make sure that the LAN cables are securely connected to the 10/100/1000 Base-T port.
2. Make sure that you are using the correct cable type for your Ethernet equipment.
3. Make sure the computer's Ethernet port is configured for auto-negotiation.
6.
Failed to configure the Wireless N Gigabit Router through web browser (By a client
PC in LAN)
Check the following
Ans.
1. Check the hardware connection of the Wireless N Gigabit Router's LAN port. The LED
will lit when a proper connection is made.
2. Check your Windows TCP/IP setting (Refer to Chapter 3 for setting details).
3. Open the Windows System Command Prompt:
For Windows 9x/ME: Manually enter winipcfg, then press Enter.
For Windows 2000/XP/Vista/Win7: Manually enter ipconfig/all, then press Enter.
4. You should have the following information listed on your Window System:
IP Address: 192.168.1.x
Submask: 255.255.255.0
Default Gateway IP: 192.168.1.1
7.
I
forgot or lost my Administrator Password.
Reset
the Wireless N Gigabit Router to factory default by pressing the "Reset"
Ans.
button for more than 5 seconds.
8.
I need to upgrade the Firmware.
In order to upgrade the Firmware with the latest features, check your local dealer or ISP for
Ans.
technical support. Before proceed the upgrading process, check the following details:
1. Download the latest Firmware and save at your pointed location.
2. Read the firmware release note carefully before proceed the upgrading process.
3. Refer to Admin – Upgrade Firmware section for the upgrading process.
9.
Testing LAN path to your Wireless N Gigabit Router.
64
Advertisement
Table of Contents
