Table of Contents
Advertisement
4.
Maximum Idle Time: the time of no activity to disconnect your PPTP session. Set it to zero or
enable Auto-reconnect to disable this feature. If Auto-reconnect is enabled, this product will connect to
ISP automatically, after system is restarted or connection is dropped.
Connection Control: There are 3 modes to select:
Connect-on-demand: The device will link up with ISP when the clients send outgoing packets.
Auto-Reconnect (Always-on): The device will link with ISP until the connection is established.
Manually: The device will not make the link until someone clicks the connect-button in the Status-page.
L2TP: Some ISPs require the use of L2TP to connect to their services
First, please check if your ISP assigned and Select Static IP Address or Dynamic IP Address.
For example: Use Static
1.
My IP Address and My Subnet Mask: the private IP address and subnet mask your ISP assigned
to you.
2.
Server IP Address: the IP address of the PPTP server.
3.
PPTP Account and Password: the account and password your ISP assigned to you. If you don't
want to change the password, keep it empty.
3.
Connection ID: optional. Input the connection ID if your ISP requires it.
4.
Maximum Idle Time: the time of no activity to disconnect your PPTP session. Set it to zero or
enable Auto-reconnect to disable this feature. If Auto-reconnect is enabled, this product will connect to
ISP automatically, after system is restarted or connection is dropped.
Connection Control: There are 3 modes to select:
21
Advertisement
Table of Contents
