Table of Contents
Advertisement
PPPoE Service Name: optional. Input the service name if your ISP requires it. Otherwise, leave it
blank.
Maximum Idle Time: the amount of time of inactivity before disconnecting your PPPoE session. Set it
to zero or enable Auto-reconnect to disable this feature.
Maximum Transmission Unit (MTU): Most ISP offer MTU value to users. The most common MTU
value is 1492.
Connection Control: There are 3 modes to select:
Connect-on-demand: The device will link up with ISP when the clients send outgoing packets.
Auto-Reconnect (Always-on): The device will link with ISP until the connection is established.
Manually: The device will not make the link until someone clicks the connect-button in the Status-page.
PPTP: Some ISPs require the use of PPTP to connect to their services
First, please check if your ISP assigned and Select Static IP Address or Dynamic IP Address.
1.
My IP Address and My Subnet Mask: the private IP address and subnet mask your ISP assigned
to you.
2.
Server IP Address: the IP address of the PPTP server.
3.
PPTP Account and Password: the account and password your ISP assigned to you. If you don't
want to change the password, keep it empty.
3.
Connection ID: optional. Input the connection ID if your ISP requires it.
20
Advertisement
Table of Contents
