Appendix A: Frequently Asked Questions - Innoband 4000-R2 User Manual

Appendix A: Frequently Asked Questions

The Frequently Asked Questions addresses common questions regarding Wireless N Gigabit
Router settings.
Some of these questions are also found throughout the guide, in the sections to which they
reference.
1. How do I determine if a link between the Ethernet card (NIC) and the Wireless N
Gigabit Router has been established?
A ping test would determine if a connection is established between your Wireless N Gigabit
Ans.
Router and computer. Using, the ping command, ping the IP address of the Wireless N
Gigabit Router, in this case, 192.168.1.1 (default). For more information on Ping Testing,
refer to Appendix C: Troubleshooting Guide. Alternatively, if the Ethernet LINK LED is solidly
on, then the Ethernet link is established.
2. How do I determine if a link between the Wireless N Gigabit Router and the Internet
has been established?
Similar to the previous question, a ping test would determine whether or not a connection is
Ans.
established. However, this time use a URL instead of and IP Address, such as
www.google.com. Alternatively, if the ADSL LED is solidly on, then the ADSL link is
established.
3. I can't get the Internet game, server, or application to work properly.
If you are having difficulties getting any Internet game, server, or application to function
Ans.
properly, consider exposing one computer to the Internet using De-Militarized Zone (DMZ) setting.
Refer to Service–Firewall–DMZ section for the setting detail.
4. I need to upgrade the firmware.
In order to upgrade the firmware with the latest features, check with your local dealer or ISP
Ans.
for technical support.
60