Table of Contents
Advertisement
ve limescale deposits from inside the machi-
ne.
After about 30 minutes, the message "Rinsing
FILL TANK!" is displayed.
11. The appliance is now ready for rinsing
through with clean water. Remove the water
tank, empty, rinse under running water, fill
with clean water and replace. "Rinsing...
Confirm?" is displayed.
12. Empty the container used to collect the desca-
ler solution and replace it under the cappucci-
no maker.
13. Press the
button to start rinsing. Hot
water flows out of the cappuccino maker and
the message "Rinsing..." is displayed.
14. When the water tank is completely empty, the
message "Rinsing Complete... Confirm?" is
displayed
15. Press the button
was present), fill the water tank and the
appliance is ready for use.
SETTING WATER HARDNESS
The DESCALE message is displayed after a period
of time established according to water hardness.
The machine is factory set for a hardness value of
4.
The machine can also be programmed according
to the hardness of the mains water in the various
regions, varying the frequency with which the
message is displayed.
Measuring water hardness
1. Remove the "TOTAL HARDNESS TEST" indica-
tor paper from its pack.
2. Immerse the paper completely in a glass of
water for one second.
3. Remove the paper from the water and shake
lightly.
After about a minute, 1, 2, 3, or 4 red squares
form, depending on the hardness of the water.
Each square corresponds to one level.
Livello 1
Livello 2
Livello 3
Livello 4
, insert the filter (if it
Setting water hardness
1. Press the P button to enter the menu.
2. Turn the selection knob to select "Water
Hardness".
3. Confirm the selection by pressing the
button.
4. Turn the selection knob and set the level
shown by the indicator paper (see previous
paragraph).
5. Press the
6. Press the
The machine is now reprogrammed with the new
water hardness setting.
TECHNICAL SPECIFICATION
Voltage: 220-240 V~ 50/60 Hz 10A max.
Absorbed power: 1350W
Pressure: 15 bar
Water tank capacity: 1.7 litres
Size: LxHxD: 284x374x441 mm
Weight: 11.4 Kg
The appliance complies with the following
EC directives:
•
Low Voltage Directive 2006/95/EC;
•
EMC Directive 89/336/EEC and subsequent
amendments 92/31/EEC and 93/68/EEC.
Materials and accessories coming into contact
with food conform to EEC directive 1935/2004.
DISPOSAL
Electrical appliances must not be dispo-
sed of as household waste.
Appliances with this symbol are covered
by European Directive 2002/96/EC.
All unused electric and electronic appliances must
be disposed of separately from household waste
by taking them to State authorised special cen-
tres.
Disposing of the unused appliance correctly
avoids damage to the environment and a risk to
health.
For more information on disposing of the unused
appliance, contact the local administration, the
waste disposal department or the shop where the
appliance was bought.
18
button to confirm the setting.
button to exit the menu.
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
