Maintenance - DeLonghi HCA Instructions Manual

is lined up with the triangular pointer .
N.B.: Never turn the dial in an anti-clockwise direction!
The timer is in effect, an electric clock and works only if the plug is
connected to the power supply.Whenever the plug is disconnected
or there is a power failure, the clock must be re-set.
To program the timer
1) Set the operating times by pushing out the notches on the dial
corresponding to the period required (each notch represents
15 mins.)
2) Make sure that the timer indicates the correct time (see
instructions on setting the correct time).
3) Select the desired function as shown in the table on page 5.
Once programmed in this way, the appliance will repeat the pre-
established program every day, if the selector is in the
Timer override
If you wish to override the timer settings, push the timer switch to
position 1 (as shown in description) manual (timer override).To
return to timed operation push the switch back to the middle
position (as shown in description).

7. Maintenance

Before carrying out any maintenance, unplug the heater from the
mains and wait for it to cool.The convector requires no particular
maintenance. It is sufficient to remove the dust with a soft, dry
cloth. Never use abrasive powders or solvents. If necessary remove
concentrated areas of dirt with a vacuum cleaner
8.Warnings
ATTENTION: in order to avoid any danger caused by an
accidental resetting of the safety system, this appliance
must not be powered through an external timer.
- Do not make use of this heater in the immediate proximity of
bathroom, washbasins, showers or swimming pools.
- Never use the heater to dry laundry.
- Never place the power cable on top of the heater while it is
hot.
- Only use the heater in an upright position.
- Do not block the hot-air outlet grilles or the intake grille locat-
ed on the bottom of the heater.
- The heater must be positioned at least 50cm from furniture or
other objects.
- If the power cable is damaged, it must be replaced by the manu-
facturer or an authorised technical service centre.
Electric Heating Convector HCA
position
6
pointer
Fig.6
operating time
Fig7