Download Print this page
DeLonghi HCX9115ECA Manual

DeLonghi HCX9115ECA Manual

Advertisement

Quick Links

IMPORTANT
SAFEGUARDS
When using any electrical appliance, some basic safety
precautions should always be observed to reduce the risk
of fire, electric shock, and/or injury to persons. Read all
instructions carefully before using the appliance. Specifically:
Danger!
Failure to observe the warning may result in life threatening
injury by electric shock.
- The appliance must not be placed
immediately under a fixed power
socket.
- Do not use the appliance outdoors.
- Do not operate any heater with
a damaged cord or plug or after
the heater malfunctions, has
been dropped or damaged in
any manner. Return heater
to
authorized service facility
for examination, electrical or
mechanical adjustment, or repair.
- This heater is not intended for use in
bathrooms, laundry areas and similar
indoor locations. Never locate heater
where it may fall into a bath tub or
other water container.
- If the power cable is damaged, stop
using the product. Power cable must
be replaced by the manufacturer, an
authorised service centre or a qualified
electrician in order to eliminate all risk.
- Do not use this heater in the immediate
surroundings of a bath, a shower and
sinks or a swimming pool.
- Do not insert or allow foreign objects
to enter any ventilation or exhaust
opening as this may cause an electric
shock, fire, or damage the heater.
- CAUTION: to prevent electric shock
match wide blade of plug to wide
slot, then fully insert.
- CAUTION: In order to avoid a hazard
due to inadvertent resetting of
thermal cutout, this appliance must
not be supplied through an external
switching device, such as a timer, or
connected to a circuit that is regulary
switched on and off by the utility.
- This heater may include an visual
alarm to warn that parts of the heater
are getting excessively hot. If the
alarm flashes, immediately turn the
heater off and inspect for any objects
on or adjacent to the heater that
may cause high temperatures. DO
NOT OPERATE THE HEATER WITH THE
ALARM FLASHING.
- If you intend to fix your appliance to
the wall, make sure that the switch or
other control devices are not within
reach of persons in the bath or shower.
Important!
Failure to observe the warning could result in injury or
damage to the appliance.
- The appliance is not intended for use
by persons (including children) with
reduced physical, sensory or mental
capabilities, or lack of experience
and knowledge, unless they have
been given supervision or instruction
concerning use of the appliance by
a person responsible for their safety.
Children should be supervised to
ensure that they do not play with the
appliance.
- CAUTION — Some parts of this
product can become very hot and
cause burns.
- Extreme caution is necessary when any
heater is used by or near children and
10

Advertisement

loading
Need help?

Need help?

Do you have a question about the HCX9115ECA and is the answer not in the manual?

Questions and answers

Summary of Contents for DeLonghi HCX9115ECA

  • Page 1 IMPORTANT slot, then fully insert. - CAUTION: In order to avoid a hazard SAFEGUARDS due to inadvertent resetting of thermal cutout, this appliance must When using any electrical appliance, some basic safety precautions should always be observed to reduce the risk not be supplied through an external of fire, electric shock, and/or injury to persons.
  • Page 2 whenever the heater is leftoperating - This heater is hot when in use. To and unattended. prevent burns, do not let bare skin - Always disconnect the plug from the touch hot surfaces. Use handle when power outlet when the appliance is moving this heater.
  • Page 3 to the outlet. ignited by the heater. - Always use the appliance in an upright - A tip over safety device turns the position. appliance off if it falls over or is - To disconnect heater, turn controls to positioned inappropriately in such off, then remove plug from outlet.
  • Page 4 order to prevent damaging the paint finish. (A) comes on and remains lit while the appliance is Fix the feet to the appliance with the nr. 4 screws 4.8x13 PH powered. G supplied (see fig. 1), 2 screws for each foot. The appliance switches to stand-by.
  • Page 5: Maintenance

    The highest is active when any key button is pressed. cutoff device which will switch the appliance off in case After a few seconds of keyboard inactivity, the brightness will of accidental overheating. To reset the cutoff, disconnect decrease to the operating brightness level. the plug from the power supply for a few minutes, remove the cause of overheating, then reconnect the Key lock...
  • Page 6: Troubleshooting

    TROUBLESHOOTING PROBLEM CAUSE SOLUTION The appliance doesn't work Be sure it is plugged in and that the electrical Plug into the power outlet outlet is working The temperature may be set too low Set the temperature to a higher position The Key lock may be activated See the section "Key lock"...