Page 2
Description of Appliance The following terms are used throughout the instruction manual Thermostat Knob Switches (certain models only) Fig. 1 Brackets Fig. 3 Fig.2 Electric Convector Heating HCM...
Page 3
Thank you for choosing this De’Longhi convector. To get the best results from your new heater please read these instructions carefully before use. This should ensure opti- mum results and maximum safety. SAFETY WARNINGS Important: to avoid the safety system resetting accidentally, this appliance must not be powered through an external timer.
Page 4
Important information for correct disposal of the product in accordance with EC Directive 2002/96/EC. At the end of its working life, the product must not be disposed of as urban waste. It must be taken to a special local authority differentiated waste collection centre or to a dealer providing this service.
Page 5
Wall-mounting IMPORTANT: Before drilling into any wall ensure no electrical cables are present in the area. In order to wall mount your convector please proceed as follows: 1. Fix two brackets “C” following carefully the dimensions as indi- cated in description (fig. 3). Use a 6 mm masonry drill and suit- able wall plugs and appropriate two screws and two brackets (provided).
Page 6
Important - UK only • The wires in the cord are coloured as follows: Green and Yellow = Earth Blue = Neutral Brown = Live. • The appliance must be protected by a 13A approved (BS1362) fuse. • warning: this appliance must be earthed. Note: •...
Need help?
Do you have a question about the HCM Series and is the answer not in the manual?
Questions and answers