To light a burner, turn the relevant knob
anticlockwise to maximum position and push down
the knob to ignite.
If the burner does not ignite, turn the control knob to
zero, and try again.
When switching on the mains, after
installation or a power cut, it is quite normal
for the spark generator to be activated
To ensure maximum burner efficiency, you should
only use pots and pans with a flat bottom fitting the
size of the burner used (see table).
If you use a saucepan which is smaller than
the recommended size, the flame will spread
beyond the bottom of the vessel, causing the
handle to overheat.
As soon as a liquid starts boiling, turn down
the flame so that it will barely keep the
Take care when frying food in hot oil or fat,
as the overheated splashes could easily
If the control knobs become difficult to turn,
please contact your local Electrolux Service