Table of Contents
Advertisement
Installation Instructions
Installing the oven
When installing into combustible materi-
al, NIN 2005, chapter 4.2.2 and the fire
protection guidelines and their provi-
sions set by the Association of Swiss
Fire Insurance Companies must be
strictly observed.
1. Insert the oven into the recess so that
the front is flush.
Make sure that the cable does not be-
come caught when sliding into place.
2. Secure the oven each side with a mini-
mum of 2 screws (Detail A).
Electrical connection/power supply
The oven must be connected to the electric-
ity supply by a designated electrician.
Use a H05VV-F type power cable or higher.
The appliance must be installed with a sock-
et supply line, otherwise the fixed home elec-
trical system must include an isolating device
with at least a 3mm-contact separation to
enable a simultaneous and all-pole cut off
from the mains, according to NIN 2000.
When connecting the appliance directly to
the mains, use at least a 120cm long cable.
1.
Lay the power cable flush to the base of
the recess.
2.
Take hold of the appliance by the side
grips and slide it ¾ of the way into the
recess.
3.
Remove the terminal box from under-
neath.
4.
Opening the terminal box (detail D)
5.
Open the catch on the cord grip (detail E).
6.
See the connection diagram for the ter-
minal connection.
7.
Secure the cord grip by pressing firmly
on the catch (detail F).
8.
Closing the terminal box.
electrolux 25
Advertisement
Table of Contents
