Changing Automatic Function Entries; Deleting Automatic Function Entries; Information On The Automatic Function - Electrolux COMPETENCE E 8100 Operating Instructions Manual

Operating Instructions

Changing Automatic Function Entries

You can still change the cook time or the end time during cooking.
0 1. Again select the function COOK TIME or END TIME with the
Clock key W.
The corresponding function indicator starts to flash. The "temperature/
time display" indicates the remaining cook time or the end time
entered.
2. Within 5 seconds, press the + or - button until the cook time or the
end time is set to the time you require.
Changes can only be made as long as the function indicators are flash-
3
ing.

Deleting Automatic Function Entries

0 1. Switch off the appliance using the mains button.
2. Turn the Oven Functions switch into the zero position.

3 Information on the Automatic Function

• The maximum COOK TIME that can be set is 23 hours and 59 minutes.
• If the end time is set first, the clock automatically calculates the
maximum cook time and suggests it. This COOK TIME cannot be
extended.
• Example: Time: 14.00 END TIME entered: 16.00
Longest possible COOK TIME: 2.00 hours.
• If the cook time is set first, the clock automatically calculates the
earliest possible end time and suggests it. This END TIME cannot be
brought forward.
– Example: Time: 14.00 COOK TIME entered: 3.00 hours.
Earliest possible END TIME: 17.00
28