Table of Contents
Advertisement
Cooking with the automatic warm up function
When cooking with the automatic warm up function, the cooking zone works
with full power for a certain amount of time and then switches back to the heat
setting set to continue cooking.
1. To switch on the automatic warm up period, turn the ring switch clockwise as
far as it will go.
2. Then turn the ring switch back to the desired heat setting for the continuing
cooking period.
3. To end the cooking process, turn back to the "O" position.
3
If you select a higher heat setting during the warming up time, e. g. turning
from "3" up to "6", the time that has already elapsed for the warming up period
is taken into consideration. If you select a lower heat setting, the warm up peri-
od will end immediately.
3
You can end the automatic warm up function early by turning the ring switch
back to the Off position and then setting the required heat setting for the con-
tinuing cooking period again.
Warming up times when cooking with the automatic warm
up function
Switch setting:
A and 9
A and 8
A and 7
A and 6
A and 6
A and 5
A and 5
A and 4
A and 4
A and 3
A and 3
A and 2
A and 2
A and 1
A and u
3
When cooking with the appliance for the first few times, take careful note of
how it performs. This will help you decide which heat settings are best for "your
cookware" and "your recipes and quantities".
.
.
.
.
.
Warming up time with the automatic
warm up function
no automatic warm up function
4.5 minutes
3.5 minutes
3 minutes
2 minutes
12.5 minutes
10 minutes
8 minutes
6.5 minutes
5.5 minutes
5 minutes
3 minutes
2 minutes
1 minutes
0.5 minutes
Using the Rings
17
Advertisement
Table of Contents
