Problems And Actions Needed; At The End Of The Cooker's Life - Electrolux EKE6100 Instruction Book

Problems and actions needed

Never attempt any repairs or work on the cooker which could cause injury or damage the product. If you cannot
solve the problem after checking the list below, contact a service company approved by the supplier.
Problem
The cooker has no electrical supply
The cooker will not work
Boiling/frying takes a long time.
The oven light is not working
The door safety catch isn't working

At the end of the cooker's life

Action needed
Check that:
•
THE FUSE
•
THE PLUG
•
THE RCD
Make sure the cooker function lock is not in use (see "The
cooker function lock" p. 14)
Check you have a suitable pan that conducts heat properly (see
"Choice of saucepan/frying pan" page 12)
Replace broken bulb (see "Changing oven light bulb"
page 19)
Activate the door safety catch (see "The door safety catch" on
page 6)
Disconnect the cooker from the electrical supply.
1
Cut off the electrical lead, as close as possible to
2
the rear of the cooker.
Make sure that the oven door safety catch has been
3
deactivated, to remove the risk of children locking
themselves inside the oven.
Contact your local council to find out where you can
dispose of your cooker.
Problems and actions needed
( ) has not gone
S
is pushed in correctly
(if fitted) has not tripped
25