Problems And Actions Needed - Electrolux EK 5162 Instruction Book

Problems and actions needed

Problems and actions needed
Never attempt any repairs or work on the cooker which could cause injury or damage the product. If you cannot
solve the problem after checking the list below, contact a service company approved by the supplier.
Problem
The cooker has no electrical supply
The rear left hotplate is not working
(230-volt cooker only)
Boiling/frying takes a long time
The oven light is not working
The door safety catch isn't working
The roasting sensor is not working
The clock is not showing the right time/not
working
The timer is not working
26
Action needed
Check that:
• ( ) has not gone
THE FUSE S
• is pushed in correctly
THE PLUG
• (if fitted) has not tripped
THE RCD
The cooker has an electrical inter-lock so that the rear left
hotplate cannot heat while the oven Swift Start function is on.
This hotplate can be used as soon as the oven Swift Start
heating is finished.
Check you have a suitable pan that conducts heat properly
(see page 11)
Replace broken bulb (see page 21)
Activate the door safety catch (see page 6)
Check that the sensor is correctly plugged in inside the oven.
Take it out and plug it in again. Set the required temperature
(see page 18)
Set the correct time (see page 7)
Set the time required (see page 14)