Electrical Connection; Stacking Kit (Optional Accessory) - Electrolux EDE421E Instruction Booklet

It is important not to connect the vent hose
to, for example, a cooker hood, or a chimney
or flue pipe designed to carry the exhaust
from a fuel burning appliance.
P0055
Note that to avoid condensation problems, it is
essential that the dryer be fitted with the flexible hose
to carry its "exhaust" at least beyond the kitchen
units; preferable outside the kitchen.
In order to prevent the appliance from overheating, it
is important that the steam exhaust is unobstructed.
Therefore, in case of a permanent hose fitted to an
exterior wall or ceiling, it must be ensured an exhaust
capacity of at least 150 m
If the dryer is fitted next to kitchen units, make
sure that the vent hose is not squashed. If the hose
is partially squashed, drying efficiency will be
reduced, resulting in longer drying times and
higher energy consumption.
If the hose is completely squashed, the safety cut-
outs with which the machine is fitted may operate.
3 /h.

Electrical connection

Before connecting the machine check that the mains
voltage corresponds to the voltage given in the
technical specifications.
Check that your domestic electrical installation can
take the maximum load required, also taking into
account any other appliances in use.
Connect the machine to an earthed socket, in
accordance with current wiring regulations.
The manufacturer declines any responsibility
for damage or injury through failure to comply
with the above safety precaution.
Stacking kit
A special stacking kit is available through your dealer,
to enable the mounting of the dryer on top of your
washing machine.
P0280
17