Table of Contents
Advertisement
NETWORK menu (continued)
PROJECTOR NAME
You can change the projector name to be displayed on the network.
1
Select [PROJECTOR NAME] in the NETWORK menu
and press the <ENTER> button.
2
Select characters with the ◄►▲ ▼ buttons and press
the <ENTER> button to enter the projector name.
You can delete the letter immediately before the cursor in the entry box
by selecting [BS].
3
Select [OK] with the ◄►▲ ▼ buttons and press the
<ENTER> button.
Select [CANCEL] to undo the changes and then press the <ENTER>
button.
Note
When you use the "Wireless Manager mobile edition 5.5", only up to eight letters from the beginning of the
projector name are displayed. We recommend that you set the projector name using eight letters or less for
identification.
10
NETWORK
PROJECTOR NAME
NAME1234
WIRED LAN
WIRELESS LAN
USER1
NETWORK CONTROL
NETWORK PASSWORD
OFF
NETWORK PASSWORD CHANGE
LIVE MODE CUT IN
OFF
COMPUTER SEARCH
MULTI-LIVE
NETWORK STATUS
MENU SELECT
ADJUST
ENTER
PROJECTOR NAME
NAME1234
Advertisement
Table of Contents
