Using the timer
Function
Automatic cut-out
Countdown timer
Selecting a cooking zone
Step
Control panel
1.
Touch
once
2.
Touch
once
3.
Touch
once
4.
Touch
once
If a heat setting is set on this cooking zone in addition to a countdown timer,
the cooking zone is switched off after the time set has elapsed.
If a cooking zone is switched off, the timer function set is also switched off.
If the pilot light is flashing more slowly, the heat setting can be set or modified.
If other timer functions are set, after a few seconds the shortest remaining time
of all the timer functions is displayed and the corresponding pilot light flashes.
Setting the time
Step
1.
2.
After a few seconds the pilot light flashes more slowly. The time is set. The time counts down.
Switching off the timer function
Step
1.
2.
The pilot light goes out. The Timer function for the selected cooking zone is switched off.
a heat setting is set
cooking zones not in use
Pilot light of the first cooking zone flashes
Pilot light of the second cooking zone flashes
Pilot light of the third cooking zone flashes
Pilot light of the fourth cooking zone flashes
Control panel
Select
for the cooking zone
Touch
or
Control panel
Select
for the cooking zone
Touch
Condition
Display
The pilot light for the cooking zone se-
lected flashes
00
Pilot light of cooking zone selected
flashes faster. Time remaining is dis-
played
The time remaining counts backwards
00
to
Outcome after the time has
elapsed
00
acoustic signal and
the cooking zone switches itself
off
00
acoustic signal and
Indicator
99
to
minutes
Indicator
electrolux 9
flashes,
flashes
Need help?
Do you have a question about the EHET66CS and is the answer not in the manual?