Table of Contents
Advertisement
turned on and the correct video source has been selected, please
check that the video source device is turned on and operating
correctly. Also check that the signal cables have been connected
correctly.
● Normally speaking, the HDMI source includes the video and audio
contents. But in some circumstance, the audio can be separately
output to the amplifier.
Connecting
Connecting
Connecting a a a a Component-Video
Connecting
Check your Video source device to see whether it has a set of
Component Video output sockets available:
● If so, you can continue with this procedure.
● If not, you will need to reassess which method you can use to
connect to the device.
To
To
connect
connect
the
the
To
To connect
connect the
the projector
1.Take a Component Video cable and connect one end to the
Component Video output sockets of the Video source device. Match
the color of the plugs to the color of the sockets; green to green, blue
to blue, and red to red.
2.Connect the other end of the Component Video cable to the
COMPONENT sockets on the projector. Match the color of the plugs
to the color of the sockets; green to green, blue to blue, and red to
red.
3.You should also connect the separate audio cable to a suitable audio
amplifier.
Component-Video
Component-Video
Component-Video source
projector
projector to to to to a a a a Component
projector
source
source
source device
Component
Component
Video
Video
Component Video
Video source
27
device
device
device
source
source
device:
device:
source device:
device:
Advertisement
Table of Contents
