Pyle PRJ3D99TU Manual page 4

- locations where altitude is higher than 3050 meters / 10000 feet
above sea level.
5.Do not block the ventilation holes while the projector is on (even in
standby mode):
- Do not cover the projector with any item;
- Do not place the projector on a blanket, bedding or any other soft
surface.
6.Do not step on the projector or place any objects upon it. Do not
place liquids near or on the projector. Liquids spilled into the
projector will make damages to the projector. If the projector does
become wet, go to your seller or authorized service center for help.
7.Do not look straight into the projector lens during operation. It may
harm your sight.
8.Do not attempt to disassemble this projector yourself, which will void
your warranty. There is no user serviceable part inside the projector.
Refer servicing only to suitably qualified professional service
personnel.
9.In areas where the mains power supply voltage may fluctuate by 10
volts, it is recommended that you connect your projector through a
power stabilizer, surge protector or uninterruptible power supply (UPS)
as appropriate to your situation.
10.When you won't use the projector for a prolonged period of time, or
want to take it to another place, please use the supplied packing
materials to store the projector.
11.Do not store the projector on end vertically. Doing so may cause the
4