Pyle PRJ3D99TU Manual page 26

1.Take an HDMI cable and connect one end to the HDMI output socket
of the Video source device.
2.Connect the other end of the HDMI cable to the HDMI input socket
on the projector.
3.Connect one end of separate audio cable to the projector, and the
other end to a suitable audio amplifier.
Note:
Note: Note: Note: You can also connect the separate audio cable to a suitable
audio amplifier. But the quality of the audio from HDMI is better.
The final connection path should be like that shown in the following
diagram:
Note: Note:
Note: Note:
● It is not recommended to establish the connection via a DVI to HDMI
cable. The weight of the DVI to HDMI adapter may be pulling down
on the HDMI port, causing it to become loose over time.
● If the selected video image is not displayed after the projector is
26