Table of Contents
Advertisement
Once the protocol has been installed and configured in Windows, the
next step is to configure the TCP/IP parameters in the network
printer.
CONFIGURING AS A NETWORK PRINTER
WINDOWS 95/98/ME
When printing using TCP/IP, the Océ LPR utility is the only option to
use. The following procedure should be used. When installing the
driver, ensure it is installed as a local printer and not a network
printer. Ensure the appropriate printer driver has been installed in
Windows.
Install the Océ LPR utility as described in "OKI LPR" on page 14 of
this manual and add the printer installed earlier.
WINDOWS NT 4.0
With Windows NT 4.0, you have two options for printing using TCP/
IP. They are:
•
Océ LPR
•
Microsoft LPR
In order to use Microsoft LPR, it must first be installed into your
operating system.
NT 4.0 requires administrator privileges.
Océ LPR
Please follow the procedure described in the Windows 95/98/Me
section "OKI LPR" on page 14.
Microsoft LPR
To install this port, the following needs to be carried out.
1.
Select [Start], [Settings], [Control Panel] and then select
[Printers].
2.
Select [Add Printer] Wizard.
3.
Select [My Computer] and then [Next].
4.
Select [Add Port].
5.
Select [LPR Port] and then [OK].
VarioLink 3550p Series Network Guide> 8
Advertisement
Table of Contents
