Hi Sharp 16 Channel Digital Video Recorder User Manual page 11

6.) BACKUP. Image backup mode.(Image back up must be done on playback mode only.)
Locate the playback point of which you want. Press BACKUP, the BACKUP CAUTION window pop-up. Press
ENTER to begin data back up. Capacity of USB device is not limit.
On playback mode, presses BACKUP:
** BACKUP CAUTION **
THE ORIGINAL BACKUP FILE
WILL BE KILLED.
PRESS [ENTER] TO BACKUP.
PRESS [BACKUP] TO CANCEL.
xxx K (Presently back up progress)
Important:
If DVR cannot detect USB device, please format it to FAT or FAT 32 on PC OS.
Additional:
During playback, USB device is full or user press BACKUP button screen display a "PAUSE" caption, User
takes out the USB device to computer USB slot then save data to hard disk. After re-insert USB device to
DVR slot, user press BACKUP again. Press ENTER to continue backup or backup button to cancel.
PAUSE
PS: NetViewer 16 CH software auto copies to USB device when data backup. See the USB Data Read and
Networking pages.
Compatible USB: Transcend 256 MB, 1 GB / A-DATA, 512MB / USB Flash Drive 128 MB /
Intelligent Stick 256 MB / SOLOMON 128 MB / ISTEC 1GB.
7.) Key Lock function
>On the Live mode, press
Press lock key again to enter the login-in window. Enter admin or user password to unlock.
Key lock function only accept password correct log in even re-boot DVR power.
Lower-Right corner of the screen:
** BACKUP CAUTION **
THE ORIGINAL BACKUP FILE
WILL BE KILLED.
PRESS [ENTER] TO BACKUP.
PRESS [BACKUP] TO CANCEL.
(lock), Only, numeric, freeze, auto, and zoom buttons could work.
11
xxx K