Cd Operation - Virtual Reality VRCD400-SDU Owner's Manual

CD Operation

1. Insert/Eject CD
Insert a disc into CD slot with label side
up. The disc will be automatically loaded
into the unit, even when it is off or at radio
mode. The word "LOAD" will blink on the
display and the CD will play automatically.
Press the EJECT Button to eject the disc
from the slot. If the disc is not removed
from the slot within 5 seconds, it will
automatically be loaded into the slot again.
When the disc is ejected and removed,
the unit will automatically switch to radio
mode.
2. Multi-Session CD Reading
This unit can read multi-session CDs. The
multi-session reading will be activated
automatically if the player detects a file
that is written in multi-session format.
Press and hold the SEL Button until "DSP
OFF" is shown on the LCD, then press
the SEL Button to cycle through the menu
selections until "MULT OFF" is shown.
Use the VOL +/ - Button to choose "MULT
ON" or "MULT OFF". The default is
MULT OFF .
3. Selecting Tracks
On the Head Unit, press the SEEK >>| Button
to advance CD to the next track. Track num-
bers will be shown on the display. Press and
hold SEEK >>| to fast forward.
Press the SEEK |<< Button to go to a previous
track. Track numbers will be shown on the
display. Press and hold the SEEK |<< Button
to fast reverse. Disc will play normally when
the SEEK >>| or SEEK |<< Button is released.
On the Remote Control, use the |<< or >>|
Buttons.
4. Play/ Pause CD
On the Remote or Head Unit, press the No.1/
PAU Button to pause the CD. Press this button
again to resume playback.
5. Scanning Tracks
On the Remote or Head Unit, press the
No.2/INT Button to play the first 10 sec-
onds of each track. Press this button again
to resume playback.
6. Repeat
On the Remote or Head Unit, press the
No.3/RPT Button to repeat the same track
continuously. "RPT ON" will appear on
the display. Press this button again to stop
repeating.
7. Random
On the Remote or Head Unit, press the
No.4/RDM Button to play all the tracks in
random order. "RDM ON" will appear on
the display. Press this button again to stop
random play.
8. UP 10
Press the No.6/UP10 Button to advance 10
tracks at a time.
9. DN 10
Press the No.5/DN10 Button to go back 10
tracks at a time.
Electronic Skip Protection - 12 or 45 seconds
Electronic Skip Protection is ideal for driv-
ing on rough roads. Press the SEL Button
for 2 seconds. The display will show
"DSP OFF". Press the SEL Button again,
"ESP12" will be displayed indicating that
Electric Skip Protection will be activated
for 12 seconds. With "ESP 12" on the
display, use the VOL +/- Button to change
the setting to "ESP 45", indicating that
Electronic Skip Protection for 45 seconds
is activated. Leave the unit idle for the new
setting to take effect.
12