Connecting And Operating The 2X1 Digital Audio Switcher - Gefen Digital Audio Switcher User Manual

Connecting and Operating the 2x1 Digital Audio Switcher

How to Connect the 2x1 Digital Audio Switcher to your devices
1 Connect the digital audio cables from your devices into the 2x1 Digital Audio Switcher
inputs.
2 Connect your digital audio receiver to the 2x1 Digital Audio Switcher output.
3 Input 1 and 2 can either be S/PDIF or TOSlink, not both.
4 Regardless of the input type the output can be both S/PDIF and TOSlink.
5 Plug the 5VDC power supply into the 2x1 Digital Audio Switcher.
How to Operate the 2x1 Digital Audio Switcher
1 Use the front panel push button to switch between sources.
2 Alternatively, use the RMT2-IR remote control port to remotely toggle between sources.
4