Connecting To The Video Jack; Connecting To The Digital Audio Terminal Or Audio Jacks - Pioneer BDP-430 Operating Instructions Manual

Connections

Connecting to the Video Jack

You can enjoy the images through the VIDEO OUTPUT jack.
STEPS
1 Be sure to turn off this Player and the equipment before making any connections.
2 Firmly connect an AV cable (supplied) to the video jacks (
Rear panel of this Player
(Yellow)
 To VIDEO OUTPUT
jack
AV cable (supplied)
 To VIDEO
input jack
(Yellow)
VIDEO L - AUDIO -R
Yellow
AV INPUT
Projector
TV
Video equipment with a video jack
After connecting
• Connect audio equipment or the audio terminals of the TV. (Page 10)
10
 and ).
Video signal outputs:
576i 50 Hz
AC IN
480i 60 Hz
576i: 576 interlace scan
480i: 480 interlace scan
BDP-LX54
Yellow
STANDBY/ON
PQLS 3D OPEN/CLOSE FL OFF
5 V USB 0.5 A
This Player VCR
NOTE
• Connect the Blu-ray disc player to TV
directly.
• When you record the program where copyright
is protected, the copy guard function is activated
automatically; the program can not be recorded
correctly. Also, the playback image via VCR may
deteriorate due to this function. However, this is
not a malfunction. When you watch the program
where copyright is protected, we recommend
that the Blu-ray disc player be connected to TV
directly.
AV receiver

Connecting to the Digital Audio Terminal or Audio Jacks

• You can connect audio equipment or the TV to the DIGITAL OUT OPTICAL terminal or AUDIO OUTPUT jacks.
• For details on digital audio output formats (PCM/bitstream), refer to the digital audio output format selection
table on page 25.
STEPS
1 Be sure to turn off this Player and the equipment before making any connections.
2 Firmly connect an optical digital cable (commercially available) or AV cable (supplied) to the optical digital
audio terminals or audio jacks ( and , or  and ).
Rear panel of this Player
(White)
TV
(Red)
To AUDIO OUTPUT

jacks
Video/audio cable
(supplied)
To AUDIO input
jacks
(White) (Red)
VIDEO L - AUDIO -R
White Red
AV INPUT
TV
Audio equipment with a digital audio input terminal
After connecting
• Load a disc and start playback. (Page 14)
AC IN
BDP-LX54
• When using OPTICAL output,
5.1 ch Digital Output is available.
7.1 ch Digital Output is not available.
White
NOTE:
7.1 ch Audio is available via the HDMI terminal.
Red
To DIGITAL OUT 
OPTICAL terminal
Optical digital cable
(commercially available)

To OPTICAL

input terminal
OPTICAL
DIGITAL AUDIO IN
Amplifier