Connecting To The Component Jacks; Connecting To The Video Jack - Pioneer BDP-430 Operating Instructions Manual

Connections

Connecting to the Component Jacks

You can enjoy accurate color reproduction and high quality images through the component jacks.
STEPS
1 Be sure to turn off this Player and the equipment before making any connections.
2 Firmly connect a component video cable (commercially available) to the component jacks (
Rear panel of this Player
(Red)
Red
(Blue)
Blue
(Green)
Green
 To COMPONENT
VIDEO OUTPUT jacks
To COMPONENT

VIDEO input jacks
(Red)
Red (C R )
Component video cable
(Blue)
(commercially available)
Blue (C B )
(Green)
Green
Projector AV receiver
TV
Video equipment with component jacks
After connecting
• Connect audio equipment or the audio terminals of the TV. (Page 11)
10
 and ).
CAUTION
• You need to select the priority video output in
"Settings" – "Audio Video Settings" – "Video Out
Select". (See page 21.)
• When the priority video output is set to "HDMI" in
"Video Out Select", the video resolution which is
output from the COMPONENT VIDEO OUTPUT
jacks is the one set in "HDMI Video Out". (See
page 21.)
• When the output from the COMPONENT VIDEO
OUTPUT jacks is prioritized, set the priority video
to "Component".
STANDBY/ON PQLS 3D OPEN/CLOSE FL OFF
5 V USB 0.5 A
This Player VCR TV
NOTE
• Connect the Blu-ray disc player to TV
directly.
• When you record the program where copyright
is protected, the copy guard function is activated
automatically; the program can not be recorded
correctly. Also, the playback image via VCR may
deteriorate due to this function. However, this is
not a malfunction. When you watch the program
where copyright is protected, we recommend
that the Blu-ray disc player be connected to TV
directly.

Connecting to the Video Jack

You can enjoy the images through the VIDEO OUTPUT jack.
STEPS
1 Be sure to turn off this Player and the equipment before making any connections.
2 Firmly connect an AV cable (supplied) to the video jacks (
Rear panel of this Player
(Yellow)

To VIDEO OUTPUT
jack
AV cable (supplied)

To VIDEO
input jack
(Yellow)
VIDEO L - AUDIO -R
Yellow
AV INPUT
Projector
TV
Video equipment with a video jack
After connecting
• Connect audio equipment or the audio terminals of the TV. (Page 11)
 and ).
Yellow
STANDBY/ON
PQLS 3D OPEN/CLOSE FL OFF
USB 5 V 0.5 A
This Player VCR
NOTE
• Connect the Blu-ray disc player to TV
directly.
• When you record the program where copyright
is protected, the copy guard function is activated
automatically; the program can not be recorded
correctly. Also, the playback image via VCR may
deteriorate due to this function. However, this is
not a malfunction. When you watch the program
where copyright is protected, we recommend
that the Blu-ray disc player be connected to TV
directly.
AV receiver
TV