Enjoying Bonusview Or Bd-Live; Secondary Video Playback; Bd-Re/-R, Dvd-Rw/-R Playback; Playback By Selecting A Title - Pioneer BDP-430 Operating Instructions Manual

Blu-ray 3d player
Hide thumbs Also See for BDP-430:
Table of Contents

Advertisement

Playback

Enjoying BONUSVIEW or BD-LIVE

BD VIDEO
This Player is compatible with BD-Video BONUSVIEW
and BD-LIVE.
When using BD-Video discs compatible with
BONUSVIEW, you can enjoy such functions as
secondary video (picture in picture) and secondary
audio. With BD-Video discs supporting BD-LIVE,
special video images and other data can be
downloaded from the Internet.
Data recorded on BD video and downloaded from BD-
LIVE is stored on the USB memory device (external
memory). To enjoy these functions, connect a USB
memory device (minimum 1 GB capacity, 2 GB or
greater recommended) supporting USB 2.0 High
Speed (480 Mbit/s) to the USB port on this Player's
rear panel. For connections when using a wireless
LAN adaptor, see "Connecting to the LAN (10/100)
terminal" (page 11). Also, during BD-LIVE operations,
do not connect a USB memory device to the USB port
on this Player's front panel.
When you insert or remove a USB memory device, be sure
to turn the main power off.
To recall data stored in the USB memory device, first insert
the disc media that was being used at the time the data
was downloaded (if a different disc is loaded, the data
stored on the USB memory device cannot be played).
If a USB memory device containing other data (previously
recorded) is used, the video and audio may not play back
properly.
If the USB memory device is disconnected from this player
during playback, playback of the disc will stop. Do not
disconnect the USB memory device while playback is in
progress.
Some time may be required for the data to load (read/
write).
CAUTION
It may not be possible to use the BONUSVIEW and
BD-LIVE functions if there is insufficient space on the
USB memory device. In this case, refer to "USB Memory
Management" on page 23 for erasing the Virtual Package
data and the BD-LIVE data in the USB memory device.
NOTE
Operation of USB memory devices is not guaranteed.
Playback of BD-LIVE function data differs depending on
the disc used. For details, consult the user instructions
supplied with the disc.
To enjoy the BD-LIVE function, a network connection and
settings are required (pages 11 and 22).
For conditions and restrictions regarding Internet
connections using the BD-LIVE function, see the section
"BD Internet Access" (page 21).
BD-LIVE is a function that provides for automatic
connection to the Internet. Discs supporting the BD-LIVE
function may send ID codes identifying this player and the
disc to the contents provider via the Internet.
The unit can be set to prevent automatic connection to the
Internet. For instructions on this setting, see the section
"BD Internet Access" (page 21).
When USB memory devices are connected to both the
USB ports on the player's front and rear panels, the device
that was connected first is used for the BONUSVIEW and
BD-LIVE functions, while the device that was connected
last is used for file playback and software updating.

Secondary video playback

BD-Video that includes secondary audio and video
compatible with Picture in Picture can be played back
with secondary audio and video simultaneously as a
small video in the corner.
1
Press
SECONDARY VIDEO during playback
to display the secondary video status. When
SECONDARY VIDEO is pressed again, the
secondary video is played.
Primary
Secondary
audio/video
audio/video
2
Press
SECONDARY VIDEO while the secondary
video is playing to display the secondary video
status. When SECONDARY VIDEO is pressed
again, the secondary video turns off.
NOTE
To listen to secondary audio, set the digital audio output
setting (See "Audio Out" on page 20) according to the
digital audio output format selection table on page 25.
The secondary audio and video for Picture In Picture may
automatically play back and be removed depending on the
content. Also, playable areas may be restricted.

BD-RE/-R, DVD-RW/-R Playback

BD-RE
BD-R
DVD-RW
DVD-R
You can play back a recorded disc.
Load the disc.
When the disc tray is closed, playback starts
automatically.
NOTE
"Finalize" refers to a recorder processing a recorded disc
so that it will play in other DVD players/recorders as well as
this player. Only finalized DVD-RW/-R discs will play back in
this player. (This player does not have a function to finalize
discs.)

Playback by selecting a title

1
While playback is stopped, press
HOME MENU
to display the HOME MENU.
, then press
2
Select "Disc Navigator" using
ENTER.
Program 1
5/21 Fri 9:30 AM 110 Min.
1 Program 1
5/21
Fri
110 Min.
Program
2 Program 2
6/15
Fri
110 Min.
1
3 Program 3
7/3
Mon
56 Min.
4 Program 4
9/18
Thu
40 Min.
5 Program 5
9/20
Sat
20 Min.
6 Program 6
9/25
Thu
60 Min.
1/All 8 Titles
Select
Enter
Return
Exit
B
Playlist
When loading a BD disc with usage restrictions placed
by a BD recorder, the PIN code input screen appears.
Then, input your PIN code.
If you input a wrong PIN code three times, the disc
tray will open. Close the disc tray, and then input a
correct PIN code.
If the Disc Navigator screen is not displayed, press
DISC NAVIGATOR/TOP MENU.
2
 to select the desired title, then press
Press
ENTER.
When seven or more titles are displayed, switch pages
by pressing PAGE +/–. The same operation can be
performed by pressing  or .
3
 STOP to stop playback.
Press
NOTE
The Disc Navigator screen also can be displayed by
pressing DISC NAVIGATOR/TOP MENU when playback
is stopped or by pressing ENTER after choosing "Disc
Navigator" in HOME MENU when playback is stopped.
About the disc navigator display
Program 1
5/21 Fri 9:30 AM 110 Min.
1 Program 1
5/21
Fri
110 Min.
Program
2 Program 2
6/15
Fri
110 Min.
1
3 Program 3
7/3
Mon
56 Min.
4 Program 4
9/18
Thu
40 Min.
5 Program 5
9/20
Sat
20 Min.
6 Program 6
9/25
Thu
60 Min.
1/All 8 Titles
Select
Enter
Return
Exit
Playlist
B
Information of selected title
Title Name
Recording Date
Recording Duration
Button Guide
NOTE
The recording date is the date stored for the recorded title,
and depending on the device used for recording may differ
from the actual date the recording (copy) was made.

Playback by selecting a Playlist

1
Press
YELLOW while the Disc Navigator screen
is displayed.
The Playlist screen is displayed.
2
 to select the title, then press
Press
ENTER.
Playback of the selected title will begin.
3
Press
 STOP to stop playback.
15

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Bdp-lx54

Table of Contents