Connecting To The Video Jack - Pioneer BDP-330 Operating Instructions Manual

Connections

Connecting to the Video Jack

You can enjoy the images through the VIDEO OUTPUT jack.
STEPS
1 Be sure to turn off this Player and the equipment before making any connections.
Firmly connect an AV cable (supplied) to the video jacks ( and ).
2
Rear panel of this Player
 To VIDEO OUTPUT
jack
AV cable (supplied)

To VIDEO
input jack
(Yellow)
Yellow
Projector
Video equipment with a video jack
After connecting
• Connect audio equipment or the audio terminals of the TV. (Page 19)
18
USB USB
(Yellow)
VIDEO L - AUDIO -R
AV INPUT
TV
AC IN
BDP-LX53
Yellow
STANDBY/ON
PQLS
This Player
NOTE
•
Connect the Blu-ray disc player to TV
directly.
• When you record the program where copyright
is protected, the copy guard function is activated
automatically; the program can not be recorded
correctly. Also, the playback image via VCR may
deteriorate due to this function. However, this is
not a malfunction. When you watch the program
where copyright is protected, we recommend
that the Blu-ray disc player be connected to TV
directly.
AV receiver
Video signal outputs:
576i 50 Hz
480i 60 Hz
576i: 576 interlace scan
480i: 480 interlace scan
HDMI OPEN/CLOSE FL OFF
USB
VCR TV