Connecting To The Lan (10/100) Terminal; Before Starting Playback; Loading The Batteries In The Remote Control; Approximate Operating Range Of Remote Control - Pioneer BDP-430 Operating Instructions Manual

Blu-ray 3d player
Hide thumbs Also See for BDP-430:
Table of Contents

Advertisement

Connections

Connecting to the LAN (10/100) terminal

By connecting to the Internet, you can enjoy BD-LIVE functions as well as update this Player's software.
When using the Internet, a broadband internet connection as shown below is required.
A separate contract with/payment to an Internet service provider is required to use the Internet.
STEPS
1
Be sure to turn off this Player and the equipment before making any connections.
2
Either securely connect a LAN cable (commercially available) to the LAN (10/100) terminal (
an AS-WL200 USB Wireless LAN Adaptor (sold separately as an option) into the USB port on this Player's rear
panel ().
Insert the wireless LAN adaptor into the USB port on this Player's rear panel. When doing this, connect the USB
memory device for BD-LIVE operations to the Player's front panel.
Rear panel of this Player
BDP-LX54
To LAN (10/100)
terminal
USB Wireless LAN Adaptor AS-WL200
(sold separately as an option)
or USB memory device
(commercially available)
LAN cable
CAUTION
(commercially available)
Use the Pioneer-designated USB Wireless LAN Adaptor sold separately as an
option. Operation is not guaranteed with other wireless LAN adaptors.
Do not disconnect the USB Wireless LAN Adaptor while the player is operating.
The USB Wireless LAN Adaptor is not sold in certain countries.
When using a broadband Internet connection, a contract with an Internet
service provider is required. For more details, contact your nearest Internet
service provider.
Refer to the operation manual of the equipment you have as the connected
equipment and connection method may differ depending on your Internet
environment.
Do not use a USB extension cable when connecting a USB memory device
to the USB terminal of the player. Using a USB extension cable may prevent
To LAN terminal
the player from performing correctly.
NOTE
Use an Ethernet hub/router supporting 10BASE-T/100BASE-TX.
LAN
Internet
Modem
Ethernet hub
(router with hub function)
Example of a Broadband Internet Connection
After connecting
Perform the communication setting. (Page 22)
Load a BD-LIVE compatible disc and play back the contents. (Page 14)
 and ) or insert
Front panel of this Player
OPEN/CLOSE
FL OFF
USB
5 V
0.5 A
Enjoying BONUSVIEW or
USB
BD-LIVE
5 V
0.5 A
Requires the USB memory device
(commercially available).
The memory device purchased
To USB port
should comply with USB
specification 2.0 and have
minimum capacity of 1 GB, with
2 GB or more recommended.
PC

Before Starting Playback

Loading the Batteries in the
Remote Control
1
Open the rear cover.
Press lightly on this
part and slide into the
direction of the arrow.
2
Insert the batteries (AAA/R03 x 2).
Insert as indicated by the / marks into the
battery compartment.
Insert the negative ()
side first.
3
Close the rear cover.
Close securely (a click should be heard).
CAUTION
Do not use any batteries other than the ones specified.
Also, do not use a new battery together with an old one.
When loading the batteries into the remote control, set
them in the proper direction, as indicated by the polarity
marks ( and ).
Do not heat batteries, disassemble them, or throw them
into flames or water.
Batteries may have different voltages, even if they look
similar. Do not use different kinds of batteries together.
To prevent leakage of battery fluid, remove the batteries
if you do not plan to use the remote control for a long
period of time (1 month or more). If the fluid should leak,
wipe it carefully off the inside of the case, then insert new
batteries. If a battery should leak and the fluid should get
on your skin, flush it off with large quantities of water.
When disposing of used batteries, please comply
with governmental regulations or environmental public
institution's rules that apply in your country/area.
Do not use or store batteries in direct sunlight or other
excessively hot place, such as inside a car or near a heater.
This can cause batteries to leak, overheat, explode or
catch fire. It can also reduce the life or performance of
batteries.
Approximate operating range of
remote control
Remote control sensor
STANDBY/ON
PQLS
30º
30º
7 m
Remote control unit

Connecting the Power Cord

Only connect the power cord once all equipment
connections are completed.
AC IN
BDP-LX54
To AC IN terminal
To AC outlet
NOTE
Place the Player close to the AC outlet, and keep the
power plug within reach.
TO PREVENT RISK OF ELECTRIC SHOCK, DO NOT
TOUCH THE UN-INSULATED PARTS OF ANY CABLES
WHILE THE AC CORD IS CONNECTED.
If you are not going to use this Player for a long period of
time, be sure to remove the AC cord from the AC outlet.
11

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Bdp-lx54

Table of Contents