Audio Cd Playback; Playback From The Beginning; Playback By Selecting A Track; Operation Procedure For The "Functions" Menu - Pioneer BDP-430 Operating Instructions Manual

Playback

Audio CD Playback

AUDIO CD

Playback from the beginning

1
Load an audio CD.
• The CD screen is displayed.
(The CD screen is displayed only when a compact
disc recorded in the CD-DA format is inserted.)
• Playback may begin automatically, depending on the
disc.
Select Enter
Functions
D
2
Press  PLAY if playback does not begin
automatically or playback is stopped.
3
Press  STOP to stop playback.
Resume playback function
• When  PLAY is pressed during playback, the position at
which playback stopped is stored in the memory. When
 PLAY is pressed, playback resumes from the point at
which it stopped.
• To playback from the beginning, cancel resume mode by
pressing  STOP, then press  PLAY. (This may not work
depending on the type of disc. In this case, open the disc
tray or enter standby.)
NOTE
• Resume playback may not function depending on the disc.
16

Playback by selecting a track

 to select the track, then press
1
Press
ENTER during playback or when playback is
stopped.
Select Enter
Functions
D
2
Press  STOP to stop playback.
Operation procedure for the
"Functions" menu
1
Press BLUE (Functions) or FUNCTION when
the CD screen is displayed.
• The "Functions" menu is activated.
Select Enter Return
Track select
D
 to select the desired setting, then
2
Press
press ENTER.
• When playback is stopped, only "Track" can be
selected.
• For a description of each setting, see "Functions
which can be set" (Page 19).
3  to set, then press ENTER.
Press
• Operations vary depending on the setting. Follow the
operation instructions on the screen.
4
Press RETURN or BLUE to exit the
"Functions" menu.
NOTE
• The displayed items vary depending on the disc.
Playing Video, Audio and Image
Files
BD-RE BD-R DVD-RW DVD-R
CD-R CD-RW USB
NOTE
• When you insert or remove a USB memory device, be sure
to turn the main power off.
• Do not disconnect the USB memory device while it is
playing.
• Files on the USB memory device cannot be played when
one of the discs below is loaded. Remove the disc.
− BDs in BDMV or BDAV format
− DVDs in VR, video or AVCHD format
− Music CDs
• For details on playable files, see "Types of Discs that Can
Be Used with This Player" (page 4) and "About Files" (page
6).
• When playing normal image files, the images are played
one at a time. With slide shows, the image switches
automatically.
1
Load the disc or connect the USB memory
device on which the image files are recorded,
then press HOME MENU to display the HOME
MENU.
 to select "Disc Navigator" (for video
2
Use
files), "Music" (for audio files) or "Photo" (for
image files), then press ENTER.
• If only a disc or only a USB memory device is loaded/
connected, proceed to step 4.
 to select "BD/DVD/CD" or "USB
3
Use
Memory Device", then press ENTER.
4
Select the file or folder.
 to select the file.
• Use
 and ENTER is
• When a folder is selected using
pressed, the files in the folder are displayed.
5
Press ENTER to play the file.
• When  PAUSE is pressed during playback, playback
pauses. Press  PAUSE again or press  PLAY to
resume playback.
6
Press  or  to switch to the
previous or next file.
 and  REV/
• Image files are switched using
 FWD. When RETURN is pressed, the file
selection screen reappears.
7
Press  STOP to stop playback.
NOTE
• The following functions cannot be used during playback of
audio files:
− Fast-forwarding/fast-reversing
− Repeat function
− Function control (page 19)
Selecting and playing a different
audio file during playback of an
audio file
1  to select the file.
Use
2
Press ENTER to start playing the file.
• The selected file is played.