Smart Settings; Control; Playback Setting; Version - Pioneer BDP-430 Operating Instructions Manual

Settings
NOTE
• Make sure to select a compatible digital audio output format,
otherwise you will hear no sound or a garbled noise.
• If the HDMI device (Receiver, TV) is not compatible with
compressed formats (Dolby digital, DTS), the audio signal
outputs as PCM.
• Secondary and Effect audio is not present on DVD video.
• This setting has no effect on the analog (L/R) audio or
HDMI audio output to your TV. It is only valid for the optical
and HDMI audio output to a receiver.
• If you play MPEG audio soundtracks, the audio signal
format will be PCM regardless of digital audio output format
selection (PCM or Bitstream).
Dynamic Range Control
This lets you adjust the range between the loudest
and softest sounds (dynamic range) for playback
at average volume. Use this when it is hard to hear
dialog.
Item
Normal: The same audio output range is played as the
original recorded audio output range.
Shift*: When Dolby Digital audio is played back, the
dynamic range of the audio is adjusted so
that the dialog portion can be heard easily. (If
the audio sounds abnormal, set to "Normal".)
Auto: When you play back audio in the Dolby
TrueHD format, the dynamic range is
automatically adjusted.
*: Lower the audio volume before setting. If you do not do so,
the speakers may emit a loud sound or excessive output may
be applied to the speakers.

Smart Settings

Auto Power Off
This sets the Player so that power is automatically shut
off if playback is stopped for about 10 minutes.
Item
Yes, No
Front Panel Display/LED
If you feel that the indicators on the Player are too
bright when watching movies, you can turn them off
except for the FL OFF indicator.
Item
On, Off

Control

This sets the Player to be controlled from the Flat
Screen TV via the HDMI cable.
Item
Yes: Select this to operate this player with the remote
control unit of a Flat Screen TV connected by
cable. This also turns on the PQLS function.
No: Select this when you do not want to use the
control function.
NOTE
• For details, refer to "About Control Function with HDMI " on
page 13.
• When "Component" is selected from the "Video Out
Select" menu, the control function with HDMI does not
work. If you want to use the control function with HDMI
features, select "HDMI" from the "Video Out Select" menu,
then reselect "Yes" for "Control".

Playback Setting

Parental Control
This lets you set the Parental Control for BD-ROM/
DVD-video depending on the disc content. The
available Parental Control Levels are shown below.
The 4-digit PIN code number needs to be entered before
the Parental Control Levels and the Country Code are set.
The Parental Control Levels and the Country Code cannot
be set if a PIN code has not been created or the PIN code
is not entered.
• Select the rating level appropriate for the age of the user.
Item (Parental control level)
8 and off: All BD-video/DVD-video can be played.
1-7: Prohibits play of BD-video/DVD-video with
corresponding ratings recorded on them.
Item (Country code)
Select the country code.
• The ratings differ according to the country.
NOTE
• Refer to "Basic Operation for Playback Setting" on page 20
for details.
Disc Language (Disc Priority Language)
This lets you select the language for subtitles, audio
and menus displayed on the screen.
Item (Subtitle)
Select the language you want to display.
Item (Audio)
Select the language you want to hear.
Item (Menu)
Select the language you want to display.
Angle Mark Display
This lets you turn the Angle Mark Display on or off when
BD/DVD video recorded with multiple angles is played
back. (The angle mark is displayed in the top right of the
screen.)
Item
Yes, No
PIN code Setting
This sets the PIN code for setting or changing the
Parental Control Level.
Item
Yes: Enter the 4-digit number.
No
NOTE
• When you forget the PIN code, you can reset the current
PIN code using "System Reset" under "Settings"–
"System". (See right.)
• You can also set the new PIN code if desired.
BD Internet Access
This allows you to set access restriction to BD-LIVE contents.
Setting item Description of setting
Permit Allow all BD-LIVE discs.
Allow only discs with owner certification.
Limit
Prohibit Prohibit all BD-LIVE discs.
NOTE
• The available functions differ depending on the disc.
• Regarding playback method of BD-LIVE contents, etc.,
perform the operations in accordance with the instructions
in the BD disc manual.
• To enjoy BD-LIVE functions, perform the broadband internet
connection (page 11) and communication settings (page 22).
Internet Setting
This allows you to restrict viewing of web contents.
Setting item Description of setting
Permit Allow access to web contents.
Limit A PIN code must be entered to access web
contents.
Prohibit Prohibits access to web contents.
NOTE
• A connection to the Internet (page 11) and settings (page
22) are required to enjoy web contents.
• The "PIN code Setting" (above) must be made to change
the "Internet Setting".
3D Mode
This sets how 3D discs are played.
Item
Auto: With 3D discs, the disc is played with 3D images.
Regardless of the "Audio Video Setting" setting,
videos are played at a resolution setting prioritizing
3D transfer.
2D: Even with 3D discs, the disc is played with 2D
images.
NOTE
• The 3D indicator on the main unit front panel lights when
3D images are being played (page 7).
• The images may be played in 2D when the screen switches
or depending on the TV being used.
• Depending on the type of 3D disc, when "2D" is set or
when connected to a device not supporting 3D, it may not
be possible to play the disc.
• To view side-by-side contents you have recorded in 3D,
you must make the proper 3D setting on your TV. In this
case, this Player's OSD will not display properly.
3D Notice
This sets whether or not to display the 3D notice when
playing 3D images.
Item
Yes, No

Version

When you select "Version", the system software
version is displayed.
Please refer to our website for information regarding
the system software updates.
IN Europe:
http://www.pioneer.eu/
IN U.K.:
http://www.pioneer.eu/
http://www.pioneer.co.uk/
IN Russia:
http://www.pioneer.eu/
http://www.pioneer-rus.ru/
IN Hong Kong:
http://www.pioneerhongkong.com.hk/
IN Singapore:
http://www.pioneer.com.sg/firmwaredownload

System

System Reset
You can reset all settings to the factory presets.
Item
Reset, Not Reset
21