Pro-Form 425 CT User Manual page 21

HOW TO USE THE STEREO SOUND SYSTEM
To play music or audio books through the console's
stereo speakers, you must connect your MP3 player,
CD player, or other personal audio player to the con-
sole through the MP3 jack.
To use the MP3 jack, plug your audio wire into the MP3
jack. Then, plug your audio wire into a jack on your
MP3 player, CD player, or other personal audio player.
Make sure that your audio wire is fully inserted.
Next, press the play button
on your MP3 player, CD
player, or other personal
audio player. Adjust the vol-
ume on your personal audio
player or press the volume
increase and decrease but-
tons on the console.
If you are using a personal CD player and the CD
skips, set the CD player on the floor or another flat sur-
face instead of on the console.
THE INFORMATION MODE
The console features an information mode that keeps
track of treadmill usage information. The information
mode also allows you to select miles or kilometers as
the unit of measurement and to turn on and turn off the
display demo mode.
To select the information mode, hold down the Stop
button, insert the key into the console, and then re-
lease the Stop button. When the information mode is
selected, the following information will appear in the
display:
Increase
• The number of
Decrease
• The total number of miles or kilometers that the
• An "E" for English miles or an "M" for metric kilome-
• A "d" if the demo mode is turned on. The console
To exit the information mode, remove the key from the
console.
21
hours that the
treadmill has
been
operated.
walking belt has moved.
ters. To change the unit of measurement, press the
Speed increase button.
features a display demo mode, designed to be used
if the treadmill is displayed in a store. While the
demo mode is turned on, the console will function
normally when you plug in the power cord, press the
power switch into the reset position, and insert the
key into the console. However, when you remove
the key, the displays will remain lit, although the but-
tons will not function. To turn on or turn off the demo
mode, press the Speed decrease button.