Left Handlebar Switches; Mode Button; Starter Interlock Switch - Polaris Victory Cross Roads Owner's Manual

Left Handlebar Switches

Lamp Switch
Emergency
Flasher Switch
(Hazard Switch)
High Beam/Low
Beam Light
Switch
Horn Button
Turn Signal
Switch
Audio Switches (if equipped)
See page 104 for audio systems operation.

Mode Button

The mode button is located on the front side of the left handlebar
switch. Use the mode button to toggle through the modes of the
multi-function display. If "Err" displays while toggling through
the features, a system error has been logged. See page 26.
Use the mode button to set the display units to either standard or
metric units of measurement (CROSS COUNTRY). See page 27.

Starter Interlock Switch

The starter interlock switch switch prevents the electric starter
from operating when the transmission is in gear and the clutch is
engaged (lever released). Read the engine starting procedures
beginning on page 46 before starting the engine.
WARNING! Never start the engine with the transmission in gear and the
clutch disengaged unless you are properly seated with the front brake
applied.
Instruments, Features and Controls
High/Low Light Switch
Turn Signal Switch
The emergency flasher switch activates and cancels the emergency flash-
ers. When the emergency flashers are active, all of the turn signals flash.
Press the top of the switch to activate the emergency flashers. Press the
bottom of the switch to cancel the flashers.
The headlight high/low beam switch toggles the headlight between high
beam and low beam. To activate the high beam, press the upper portion of
the switch; to activate the low beam, press the lower portion of the switch.
To sound the horn, press the horn button.
Move the switch to the left to activate the left turn signals. Move the switch
to the right to activate the right turn signals. A signal will deactivate auto-
matically when speed or distance reach predetermined levels. To cancel a
signal manually, move the switch to the center position and push it inward.
Momentary Feature: Move the turn signal switch left or right and hold it in
that position for at least one second. The momentary feature will activate
and the signal will then cancel when the switch is released.
Flasher
(Hazard)
Switch
Horn Button
Description
Interlock
Switch
Audio Switches
Mode Button
Clutch
Lever
29