Table of Contents
Advertisement
Maintenance
Fuse Replacement
NOTICE: Use fuses with the recommended amperage to avoid damage to the electrical system.
Fuse Application
Engine
Fuel Pump/Ignition Coil
Lights
Turn Signals/Horn
Ignition
Chassis
Anti-Lock Brakes (ABS)
Tip: Use the fuse puller provided in the tool kit to
remove a fuse.
1. Remove the right side cover.
2. Lift the release tab and slide the fuse
box upward to remove it from the
bracket. Release the tabs on each side of
the fuse box cover and remove the
cover.
3. Remove the damaged fuse and seat the
new fuse firmly in its place.
4. Reinstall the fuse box cover with the
double cut-out to the left (with print
readable from right side of motorcycle).
5. Reinstall the fuse box and the side
cover.
Reverse Fuse (if equipped)
84
Fuse Recommendations
Fuse Size
15 amp
15 amp
20 amp
10 amp
10 amp
20 amp
30 amp (2)
Radio Fuse (if equipped)
Fuse Application
Reverse (if equipped) (on rear tire
debris flap)
CROSS COUNTRY ONLY
Accessory (under right side cover)
Radio (in fairing behind headlight)
12-Volt Storage Compartment Outlet
(TOUR model) (under electrical cover
above battery)
Fuse
Box
Accessory
Fuse
(if equipped)
12-Volt Storage Compartment
Fuse Size
25 amp
20 amp
25 amp
10 amp
ABS Fuses
(if equipped)
Outlet (if equipped)
Advertisement
Table of Contents
