Battery Care; Park And Cover The Motorcycle - Polaris Victory Cross Roads Owner's Manual

Engine Protection
Change the engine oil. See page 57. Carbon deposits and combustion acids, normally sus-
pended in the engine oil when in service, settle on internal engine components during stor-
age. Settled deposits can cause engine damage or internal corrosion.

Battery Care

1. Remove the battery. See page 77.
2. Clean the battery terminals first with a wire brush to remove any loose deposits.
3. Wash the posts and the ends of the battery cables with a solution of 1 part baking soda to
16 parts water. Rinse with clean water and wipe dry.
4. Apply a thin film of dielectric grease (available from your VICTORY dealer) to the posts
and cable connectors.
5. Clean the outside of the battery with a solution of mild detergent and warm water.
6. Store the battery in a dry area with a temperature of 32° to 90° F (0° to 32° C).
7. While in storage, fully charge the battery once a month. See page 78.

Park and Cover the Motorcycle

Park the motorcycle in its storage location. Cover it with a genuine VICTORY motorcycle
cover, or a cover made from a durable, breathable material designed for storage. Covering
the motorcycle helps protect it from dust and other airborne materials. The cover must be of
a breathable material to prevent moisture from building up on the motorcycle which can
cause oxidation of metal surfaces.
Rodents
Mice and other rodents are often the worst enemy of a stored motorcycle. If the motorcycle
will be stored in an area where mice are a concern (particularly in rural areas, barns, sheds,
etc.) be sure to take extra measures to deter their infestation. This may include placing a
screen mesh over any intake or exhaust openings (just be sure to remember to remove them
when you take the motorcycle from storage).
Maintenance During Storage
During extended storage periods, maintain tire pressure and battery voltage at the recom-
mended levels.
Cleaning and Storage
95