Table of Contents
Advertisement
Door Reversal Instructions
The door opening direction can be changed if
required.
Warning! Before reversing the door, isolate
1
the appliance from the mains supply.
Proceed as follows to reverse the door opening direc-
tion:
F
H
F
1. Un-screw the screws A on the front panel of the
appliance.
2. Take-off the door by displacing it horizontally.
3. Un-screw the screws B on the inside of the door
and take-off the hinges C.
4. Unscrew and take-off the locking block D.
5. Release the coverplates E, F and G with a thin
screwdriver by pressing on the latching device,
displace them to the side. Take them out and
insert them again on the opposite side.
6. Screw-on the hinges C and the locking block D on
the opposite side of the door.
7. Screw-off the door catch H and remove it.
8. Take-out the latched catch covering J.
9. Insert the door catch H and the catch covering J
on the respective opposite side into the break-out
and screw-down or latch into position.
10.Push the door with the hinges into the breakouts
provided for them in the front panel of the appli-
ance and firmly attach it with the screws.
Warning! The appliance is safe again for
1
operation only when all plastic parts have
been mounted.
A C B
J
G
J
G
A C B
E
D
E
21
Advertisement
Table of Contents
