Table of Contents
Advertisement
Installation
Specifications
Outside Dimensions:
Width:
Depth:
Cut-out Dimensions:
Width:
Depth:
Supply Voltage:
Frequency:
Total Connected Load:
Please examine the appliance for any damage su-
-
stained during transportation! Only install compo-
nents which are in perfect condition! Handle
carefully when installing! Do not let any sharpedged
or pointed tools (screw drivers etc.) be placed or fall
onto the glass top!
Cut out worktop to prescribed measurements or tem-
-
plates (saw exactly along the scribing).
Check seal for perfect fit and overall cover. Lower
-
the ceramic hob into place and align orrectly.
Fastening
Place the whole ceramic-hob into the cut-out. Press
-
firmly on one side then on the opposite side to snap-in
the unit.
Electrical connection
The electrical connection of the ceramic hob to the
-
specially provided built-in switch box and to the
built-in range should only be carried out by a trained
technician.
-
During assembly the switch box and the stove must
be idle.
Connect cable-plug with appropriate receptacle fixed
-
on range or controlbox.
6.94
1000 mm
+
S
SC
520 mm
984 mm
504 mm
230 V
50 Hz
6.94 kW
Prod-nr:
kW
230 V
~ 50 Hz
Typ 086.0.A
R3
Z
ca. 3
941 592 708
Serie
EHC 010 X
39
Advertisement
Table of Contents
